Eyeglasses Frame Warmer, Optical Eyeglasses Frame Heater with Safety Windshields, Wind Speed 4m/s, 50~110℃ Temperature Adjustable, Double Switch Button for Eyeglasse

Product Description: The operation is very simple, turn on the power, turn on the heating, adjust the temperature knob, and turn off the power and heating after completion. No need to adjust the temperature next time if the material is the same. Norm: Name:Eyeglass Frame Heater Size:30*14*19.5cm Product Weight:1.26g Power of heating wire:580W Supply Voltage:100V- Motor power:6W Wind speed:4m/s Temperature setting:50°C-110°C Packing List： Host*1 Power Cable*1 Manual*1

• High Efficiency: The Product Adopts High Quality Heating Line, Which Can Reach The Highest Temperature In 2 Minutes. In Addition, It Has Constant Temperature Control To Ensure That The Frame Will Not Be Damaged.
• Adjustable Temperature: The Product Has An Adjustable Temperature Range Of 50-100℃ (122-212℉) To Meet Your Heating Needs. Turn The Temperature Control Knob To The Bottom And Wait Patiently For 1-2 Minutes Until The Temperature Reaches 212℉.
• Fast heating&low noise: The frame wramer uses high-quality electric heating wire, which makes the temperature rise quickly and the work efficiency is high. The working noise is lower than 45dB, which is suitable for use in optical shops. The reason for its low noise is that it does not use a high-power air outlet fan, the air output is not large, but it heats up quickly and keeps quiet.
• Thoughtful Design: The product comes with safety windshields, which not only make heating faster, but also can Place the frame on the heating port without holding, greatly increasing the safety and convenience of work.
• Widely Use: The frame warmer is suitable for correcting non-metal spectacle frames, resin/plate, etc. It can soften the frame without being damaged by heating, and then the frame can be adjusted and repaired, which is widely used in optical shops and optical processing industry.